Moistureproof No Bubble BOPP Film for Cigarette Cases Packing

• Material: BOPP
• Type: Shrink Film
• Transparency: Transparent
• Hardness: Soft
• Molding method: Blow Molding
• Length: 2000m-3000m
• Model NO.: BOPP-09
• Width: 120mm-550mm
• Thickness: 21-25micron
• Holographic: Available
• Shrinkage: 2%-10%
• Item Name: BOPP Film
• EVA: 24 Gloss
• Tensile Strength: ≥200
• Transport Package: Pallets / Carton Also Available
• Specification: 120mm
• Trademark: Binhao
• Origin: China
• HS Code: 3920209090
• Production Capacity: 300 Tons/Month

Product Description

Moistureproof No Bubble BOPP Film For Cigarette Cases Packing 


Introduction:
 

Production of BOPP film is made from polypropylene polymer melt through the long and narrow nose first sheet or thick film, and then within the special drawing machine, under certain temperature and the set speed, at the same time two or step by step in the vertical direction (vertical, horizontal) on the drawing, and through the appropriate cooling or heat treatment or special processing (such as corona, coating, etc.) made of thin film.

 

The abbreviation of BOPP is "Biaxially Oriented Polypropylene", BOPP film is two-way stretch Polypropylene film. Production of BOPP film is made from polypropylene polymer melt through the long and narrow nose first sheet or thick film, and then within the special drawing machine, under certain temperature and the set speed, at the same time two or step by step in the vertical direction (vertical, horizontal) on the drawing, and through the appropriate cooling or heat treatment or special processing (such as corona, coating, etc.) made of thin film.

 

Details:

 

NO.	Item			Unit	Index		Remarks
Size deviation
1	Width deviation	50~150		mm	±0.5		-
		151~400			±1.0		-
		401~1200			±1.5		-
2	Maximum thickness deviation	12~19μm		%	±5.0		-
		20~29μm			±4.0		-
		30~50μm			±3.0		-
Physical and mechanical properties
					Ordinary heat sealable film	Shrinkage heat sealable film	-
1	Tensile strength		Vertical	MPa	≥125	≥130	-
			Horizontal		≥220	≥240	-
2	Elongation at break		Vertical	%	≤200	≤200	-
			Horizontal		≤80	≤70	-
3	Hot-shrinkage rate		vertical	%	≤5.0	>5	-
			horizontal		≤4.0	>4	-
4	Young modulus		Vertical	MPa	1800	>2000	5mm/min
5	Haze			%	≤3.5	≤2.5	-
6	Coefficient			-	≤0.5	≤0.4	Single side
7	Ultimate strength			N/15mm	≥2.0	≥2.0	(135±5)ºC·0.18MPa·1s
8	Luster(45º)%			-	≥80	≥85	-
9	Wetting tension			mN/m	-	-	Conform with contract
10	WVT			g/(m^2·24h·0.1mm)	≤2.0	≤2.0	-

Advantages:


1. Enhance the finished product's value through high transparency and super gloss finish. Prevent lamination from being pressed, bubbled and desquamated. Protect from harmful substances and water-proof, making long life storage for printings.
2. Available in various paper and inks, and suitable for lamination even with powder paper. After be treated with corona on the surface, it is good for spot UV and hot stamping.
3. Excellent cost saving as mixing of adhesive, coating and drying processes are not required. The operation doesn't ask for special technique and the film can be used in dry and wet laminator.
4. Environmental friendly, pollution-free working environment. No hazardous to health and secure to use as no toxic gases or volatile content is emitted.

 

FAQ

• Are you a manufacturer of packaging materials?
• Yes, we are printing and packaging material manufacturer and we have our own factory which is located in Guangdong,China.
•  
• What is your MOQ?
  Normally our MOQ is 3 tons,but we can understand different customer situation.
•  
• What is your delivery time?
  3Tons within 10 days after receiving 30% deposit, it mainly depends on the quantity of the goods, and the time may be slightly extended for special product need make new mold.
•  
• What is your price term and payment term?
  Our price term is EXW, FOB, C&F; and payment term is T/T, L/C or Western Union, it should be T/T 30% deposit, and balance before shipment.

Picture show: