Thermal Stability Lamination BOPP Film Roll Transparent for Inner Pack

• Material: BOPP
• Usage: Packaging Film
• Type: Shrink Film
• Transparency: Transparent
• Hardness: Soft
• Processing Type: Blow Molding
• Model NO.: BF028
• Character: Moisture Proof
• Length: 2000m-3000m
• Width: 120mm-550mm
• Thickness: 21-25micron
• Surface: Clean
• Shrinkage: 2%-10%
• Transport Package: Pallets / Carton Also Available
• Specification: 350mm
• Trademark: Binhao
• Origin: China
• HS Code: 3920209090
• Production Capacity: 300 Tons/Month

Product Description

Thermal Stability Lamination BOPP Film Roll Transparent For Inner Pack


Introduction:
 
 

BOPP Thermal Laminating Film is mainly made of BOPP + EVA.

We use extrusion-coating process to combine these two layers.

In the final film one side has properties of BOPP film and the other side becomes heat sensitive surface used for dry lamination.

This product has two classifications: glossy/shine/transparent and matte/opaque, both of which sees thickness from 14micron to 32micron.

Its width could be from 180mm to 1880mm and length from 150m (1 inch core, 25mm) to 4000m (3 inch core, 76mm).

Details:

 

Property	ASTM Test Method	Cast, Uniaxial Orientation	Biaxial Orientation
Area factor in 2/lb./1 mil film	-	30,400-31,300	30,600
Specific gravity (g/cm3)	D1505	0.885-0.905	0.902-0.907
Tensile strength (psi)	D882	4500-7000	7500-40,000
Elongation (%)	D882	550-1000	352475
Tear strength (g/mil propagation)	D1922	25 MD 600 TD	3-10
Fold endurance	D2176	Very high	Excellent
24 h % water absorption	D570	0.005	0.005
Water vapor transmission rate (g/mil/100 in.2/24 h at 100°F)	E96	0.7	0.25
Oxygen permeability (cm3/100 in.2/mil/24 h/atm. at 77°F)	D1434	150-240	160

Advantages:


1. Enhance the finished product's value through high transparency and super gloss finish. Prevent lamination from being pressed, bubbled and desquamated. Protect from harmful substances and water-proof, making long life storage for printings.
2. Available in various paper and inks, and suitable for lamination even with powder paper. After be treated with corona on the surface, it is good for spot UV and hot stamping.
3. Excellent cost saving as mixing of adhesive, coating and drying processes are not required. The operation doesn't ask for special technique and the film can be used in dry and wet laminator.
4. Environmental friendly, pollution-free working environment. No hazardous to health and secure to use as no toxic gases or volatile content is emitted.


Picture show: